Saturday, December 1, 2012

NO REVERSE ON TRANSMISSION

Transmission will not go in reverse, Transmission will shift in drive but no reverse


One of the following reason mentioned below is possible for these problem:----

No Reverse

  • Transmission  fluid level is got low.
If the fluid is low then refill the fluid to its required level.

  • Improper fluid refilled.
Always fill correct tranny fluid.If wrong fluid is filled then it can cause gear shift issues.

  • The shift cable for Transmission is broken or misaligned.
Inspect the condition of shift cable,if its got misaligned then realign it .If the cable is worn out or broken then replace the shift cable.

  • Band/clutch application pressure is very low.
Verify the clutch band condition if it seems worn out then it will not create required pressure.
  • Transmission Fluid filter is clogged or got worn out.
Verify the condition of transmission fluid filter.If the filter is very dirty and very old then its suggested to replace the filter.If the filter is very dirty but just newly replaced then just get the filter cleaned.
  • Faulty assembly gaskets or gasket got loose.
Inspect the main assembly gasket conditions,if the gasket bolts are out of its torque specs then refit the bolt and it will help.If gasket is got worn out then it has to be replaced.

  • The separator plate damaged.
Inspect condition of separator plate if its slipped from its actual position then readjust to its actual place.If the plate is broken/damaged then it has to be replaced.
  • Transmission Pump assembly bolts out of specifications.
Inspect the pump assembly condition for transmission.Also get the transmission pump pressure tested.If the pressure is low or leaking then pump has to be replaced.

  • Reverse clutch issue.
Inspect the condition of clutch,if its damaged or leaking then clutch has to be replaced.
  • Direct/reverse servo piston seal cut/leaking.
Confirm that piston seal is not letting the pressure loose.If the seal is worn or loose then it has to be replaced.



  • Faulty TCC( Transfer case control) Solenoid.
TCC solenoid needs to be replaced.

  • Issue with rear or front valve body.

Valve body got cracked or leaking.


It can be issue with gears or problem with transmission and needs to be rebuilt. Also get the tranny fluid checked. If it’s low, then such problems occurs.


To troubleshoot these types of issues, check the actual solved problems with these types of issues.
There are solved help links provided below: -------
Check the link below and go through the details and diagrams to troubleshoot the problem: -----


2003 Lexus RX300: Transmission Fluid Burnt Brown and not Shift to reverse?
-----------       
2007 Chrysler 300: Transmission Stuck in Park?
-------------
2000 Toyota Camry: Transmission slipping and Stuck up?
           
----------
1996 Toyota Corolla: Transmission Shift Interlock will not Release?
-------------
Lexus LS400: Transmission or Torque Converter?
------------
CV AXLE stuck in Transmission?

------------
Transmission in reverse, acts like it’s in neutral?
------------
Delayed shift and harsh Shifting?
------------
Dodge neon wont go in reverse?
-----------
Dodge Automatic transmission will not go into reverse?
-----------
Dodge manual transmission will not go in reverse gear?
------------
Transmission is making buzzing noise?
------------
1998 Dodge Ram: Not Shift To Reverse?
------------
Transmission leak on Toyota?
-------------
Automatic transmission, with no reverse?
---------          
No Movement When Transmission is Shifted to Drive or Third?
---------
While going in reverse mode Fuse number 27 blows on Ford Ranger?



These will help.
Thanks.



CRUISE CONTROL Not working,cruise control replacing,troubleshooting cruise control problems,

Cruise control Speed control not working


Cruise control is for controlling vehicles speed system.Its a automatic speed control of the vehicle.

The driver has to set the required speed for his vehicle.The Cruise system sense the throttle of the car to maintain a steady speed as set by the driver.

But there are certain limitation the driver can adjust the speed.

These Auto speed controlling system is very helpful while long drives,where driver don't have to keep the accelerator pedal pressed continuously.


The cruise control system is day by day getting improved and modernized.These is easy driving for car drivers.
But when these system stops working,here the real issue starts.

Now a days auto garages charge heavy service charge to inspect the vehicles.Some garages charge as per time taken for the inspection and repair.

So its always better to know what possible issue is there.

May be you cannot do the actual repair,but if you can at-least know the cause of problem or the faulty component causing cruise control to stop operating then you know the repair cost before you visit the garage and don't get fooled.

It can be faulty cruise control switch. If the switch is replaced, then it can be wiring issue or faulty cruise control board. But as the switch is replaced, get the voltage at the switch tested to confirm the switch is actually receiving voltage. If no voltage received at switch power supply wire then, apply external 12 volt power to the cruise control switch wire and then see if cruise control comes ON. If yes, then you know wiring is issue.

So to troubleshoot Cruise control related problem there are solved help links. Check the link directly and refer the details to solve this problem yourself, with help of diagrams: ------



Ford ranger cruise control not working?                                   http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

-----------

Horn and Cruise control quit working?

--------
Horn and cruise control not working on Plymouth Grand Voyager?
------------------

Horn and Cruise control quit working on 2003 Jaguar S-Type?

-------------

Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500

----------

Cruise control stop working on 1994 Ford ranger?

----------

Cruise control not working?

--------------

1996 Ford Explorer: Cruise Control Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html




These will help.
Thanks.



Engine stalls,car stalls while starting,vehicle stalls while starting, Engine stalls and dies, Car stalls and stops,

Car Stalls while starting and Car stalls while driving,Car stalls and stops ................


These types of stalling issues are very much noticed by car drivers.

These issues are mostly due to vehicle not serviced and no tune up done on time for engines mechanical components.

You car has to be well maintained to be away from such problem.

Stalling is not a major issue when it starts, buy if avoided then it can be a costly repair issue at-last.

There are many possibilities for why the engine stalls or why the car starts fine but stalls while driving.

On some cases vehicle runs fine but stalls when engine gets warm.
On some cases the issue / case is reverse the vehicle stalls while cold start but gets ok after engine gets warm.

To troubleshoot these various engine stalling issues,there are few very help link provided below:-----

Mostly all types of Stalling issues are mentioned below with their respective solutions to make you problem solve:-----



It can be low fuel pressure issue or clogged fuel pump. Or its engine related issues,---------------
Check the help link mentioned below to troubleshoot the problem: ------


Engine stalls when gas is given?
-------------
Car stalls when MAF sensor is connected?
------------
Car Engine Stalls While Driving?
--------------
Car stalls and throws white smoke from exhaust?
-------------         
Stalls And Dies At Stop Sign?
------------
GMC Sonoma Stalls and idles low
------------
Nissan Pathfinder stalls and bucks on Acceleration?
-----------------
1992 Chevrolet stalls and shutdown?
------------
Stumbling and stalling at idle after engine rebuild?
--------------
1990 mazda 323 stalls and quit running?
-------------
2000 Toyota Camry: Idling and Stalling Problem?
---------
1995 Toyota Corolla: Stalls, Sputters and Pops Through Intake Manifold?
----------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?                 
--------------
Dodge Dakota stalls, stumbles at idle. Has low fuel flow and runs hot?
--------------
1994 Toyota 4Runner: Stalls and Stops While Driving?
---------------
1997 Toyota Camry: Erratic Idle and Intermittent engine stalling?
-------------
Ford Maverick: No Idle and Stalling issues?



These details will help.
Thanks.






CAR POWER SEAT, ELECTRIC SEAT,POWER SEAT WILL NOT WORK,SEAT WILL NOT GO FORWARD,

POWER SEAT NOT WORKING

Cars Power seat is a driver side seat.These seat works by switch.Most of the cars have these seat installed on driver seat.
Its controlled by motors .
Now a days latest cars have power seat for complete front section.Drivers as well as passenger front side.

Its has various adjustments which normal manual seats don't have.The power seats can be raised or lowered and tilted to suit the comfort of the driver and/or passenger.
On normal seats there is just a manual level,which you have to manually pull and adjust the seat front/back movement.

But power seat functions with set of motors and make these seat backward/forward low/high movement bit automatically and easily.

If used properly these feature is very enjoyable,but in cases where these power seat operating gets faulty,then the real problem starts.

It can be anything from faulty motor to faulty power seat switch to its wiring from motor to switch.

There is no one motor.There is motor for each adjustment.So if you check particular motor it must be working, and fault must be in other motor.So all motors and its connections needs to be checked.

On some cases the seat will not work,even though every electrical part is functioning and giving correct voltage.On such cases the issue is obstruction.Inspect the seat rails and the area under the seat,mostly some nail or coil or dust is got obstructed causing the seat to move forward/backward.

To troubleshoot the power seat related issue.

We have few very good help links with accurate and complete solutions.

Go through the help links mentioned below:-----



1994 Lexus GS300: Power seat will not go back?
-----------
1997 Toyota Avalon: Power Seat will not Move back?
----------
1998 Chevrolet Corvette: Power Seat Control Now Working?
-----------
Power seat will not go Forward
-----------
Replacing power adjustable bucket seats to both heated and cooled seats?
-------------
Volvo Seat Removal with Heated Seats?
-------------

How to Remove Rear seat on Rover 600?
---------
How to remove Seat?



These will help.
Thanks.




HEATER CORE REPLACEMENT, HEATER CORE REMOVAL, TROUBLESHOOT HEATER CORE,FLUSH HEATER CORE,

HEATER CORE FLUSH AND HEATER CORE REPLACEMENT


Heater core used to heat the interior of the vehicle.

Its a radiator like device.

Radiator is to cool the engine and its engine components,while heater core is used as to heat the interior compartment.Its like when in winter days when there is no need of A/c , to keep the vehicle warm from inside the heater core is used.The hot air blows in the compartment via heater blower fan.
The fan is controlled by blower motor.
Hot coolant passing through the heater core gives off heat before returning to the engine cooling circuit.

The heater core is located under vehicles dashboard.
The heater fan blows air through the heater core and into the passenger side compartment of vehicle.

The coolant required for functioning of heater core is taken from cylinder head directly,so it does not have to depend on thermostat. The heater core will receive its hot coolant,whether thermostat is open or close.

The coolant flow gets clogged in the  piping  if the coolant system is not flushed or if the coolant is not changed regularly. 
On cases of coolant flow getting clogged  the heater core will not work properly. If coolant flow is restricted, heating capacity will be reduced or even lost altogether if the heater core becomes blocked.

On that cases first try to flush the heater core and see if that is helping or not.If not then heater core has to be inspected and replaced.


If it’s clogged it can be cleared with the use of Garden hose pump. The water has to be turn into the heater hose line and then water has to be removed out via the pump.
==========
For complete step by step procedure, refer heater core flushing and other help links mentioned below.

======
Check the links below: -----

How to Flush Heater Core?
------------                
How to replace heater core on Chevy Astro?
-----------
Replacing heater core for grand marque?
------------

How to replace heater core for All car models?
Click the link below:---

-------------
How to replace heater core on Buick Regal?
-------------
How to Remove Heater Core on 2008 Honda Odyssey?
------------
Honda Heater Core Replacement?
------------
How to replace heater core on Mitsubishi magna?
-----------
How to replace heater core on Mitsubishi eclipse?



These will help.
Thanks.


DOOR PANEL REMOVAL,car door panel,door panel components,front door panel,rear door panel,

How to remove car door panel




Its just fitted with few screws and hidden lock clips. The clips are very delicate and can break easily. But no worry, the clips are easily available.
On some vehicle models these screws are hidden. Once the panel is loose, don't just pull it out, there are few wire connectors connected, first disconnect the connector plug, then lift the panel out and keep in safe place for re-installing.

For your help, there are few very helpful  links with diagrams and solutions to make your task easy. 

Check the link below:----

------- 
---------
Vehicle door panel components? 
----------
How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
---------------
Hummer H2 Door Panel Removal?
-------
Hummer H2: How to remove Front Door panel?
--------------
2009 Hummer H2 Door Panel Removal
-----------
how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html
------------
How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html
-------------
how to remove rear window inner panel on Hyundai Elantra?
http://technoanswers.blogspot.com/2011/05/how-to-remove-rear-window-inner-panel.html
------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
------------
These details will help.
Thanks,.

Car starter removal,Starter motor testing,Starter repairs,Starter solenoid,Starter wiring,


CAR STARTER REMOVAL& TESTING



  • One Wire From Starter Motor Goes To Solenoid And Other Goes To BATTERY. 
  • Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE RUNS.


For your help there are few relatively help links showing how to remove and install starter with proper instructions:-----

Check the link below:-----


How to test starter solenoid?
--------------------
How to test cars starter?
-----------
How to replace starter in car?
-----------
How to replace Starter on Infiniti Q45?
----------
2006 GM Montana: How to replace Starter Solenoid?
-----
Saturn SL2: How to replace Starter Motor?
--------
Saturn SL2 Starter Wiring Diagram?
----------
--------------------
----------
-------------


These will help.
Thanks.