Friday, November 11, 2011

Arming The System?

The procedure is as follows :---
  1. Place the ignition switch in the OFF position.
  2. Attach the sensors, the steering column connector and the seat belt tensioner connectors.
  3. Connect the negative battery terminal.
  4. Place the ignition switch in the ON position. Check that the SRS air bag light illuminates for 6 seconds and extinguishes. If it illuminates in any other pattern, check the components and their connections for proper operation and recheck the operation of the warning light.
  1. Place the ignition switch in the OFF position.
  2. Connect the sensors, the steering column connector and the seatbelt tensioner connectors.
  3. Connect the negative battery terminal.
  4. Place the ignition switch in the ON position. Check that the SRS light illuminates for 6 seconds and extinguishes. If it illuminates in any other pattern, there is a problem that needs to be rectified by a qualified BMW technician.

---------
For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------

No comments:

Post a Comment